|
Premium Audiophile USB Turntable
AUDTT4USB - Setup Instructions
Choose the Relevant Setup Guide
There are two possible setups for using Golden Records Vinyl to CD converter to convert your vinyl records or cassettes to CD or mp3. Just select the setup guide relevant to you from the list below.
Setup Guide for USB Turntable or Direct Turntable Connection
Hardware Requirements
| A - | USB Turntable or standard record player. |
| B - | A Stereo RCA to 3.5mm Stereo cable,
|
| C - | OR a Stereo RCA to Stereo RCA cable with a Stereo RCA to 3.5mm Stereo Adapter, |
| D - | OR USB cable from USB turntable (this is usually supplied with the product). |
| E - | Desktop or laptop computer with a sound card. |
| F - | Optional CD burning drive (for saving recordings to CD). |
| G - | Golden Records Vinyl to CD conversion software. |
Setup Guide
- Make sure the record player is switched off.
- Using one of the cables described in B or C above, connect the record player to the sound card's Mic-In port. If using a USB turntable (requirement D above), connect the turntable to a spare USB port on your computer.
- If using a USB turntable, Windows will automatically detect the hardware and install drivers for it. It will also add the turntable as a separate audio recording device on your computer (you can find it in the Control Panel -> Sounds section). The turntable will be ready to use at this point, but you should always read the turntable manual to ensure the product has been installed correctly.
- Download and Install Golden Records onto the computer.
- You are now ready to convert your vinyl records!
Setup Guide for Record Player using an Amplifier
Hardware Requirements
| A - | Record player capable of playing 33 or 45 RPM records. |
| B - | A Stereo RCA to Stereo RCA cable. |
| C - | An Amplifier with Phono and Line Out connectors. |
| D - | A Stereo RCA to 3.5mm Stereo cable, |
| E - | OR a Stereo RCA to Stereo RCA cable with a Stereo RCA to 3.5mm Stereo Adapter. |
| F - | Desktop computer with a blue Line-In port on the back. |
| G - | OR for a laptop, you will need the USB UCA202 Line-Level Audio Interface. This product has RCA stereo Line-In connectors. |
| H - | If using the UCA202 device in G, you will need a second RCA stereo cable as described in B. You will not need either D or E.
| | I - | Optional CD burning drive (for saving recordings to CD). |
| J - | Golden Records Vinyl to CD conversion software. |
Setup Guide
- Make sure the record player and amplifier are switched off.
- Using the cable described in B above, connect the record player to the amplifier's phono port (it should be labelled on the amplifier).
- Using the cable described in D or E above, connect the cable from the Line-Out (Aux) on the amplifier to the sound card's Line-In jack in the back of the computer (the blue port on a PC).
- If using the USB UCA202 Line-Level Audio Interface, first connect this product to a spare USB port on your computer. Windows will automatically detect the hardware and install drivers for it. It will also add the device as a separate audio recording device on your computer (you can find it in the Control Panel -> Sounds section)
- Connect the second RCA cable from the Line-Out (Aux) on the amplifier into the Line-In RCA ports on the UCA202 device.
- Download and Install Golden Records onto the computer.
- You are now ready to convert your vinyl records!
Cable Guide
 |
|
A Stereo RCA to 3.5mm Stereo cable |
| |
 |
|
A Stereo RCA to Stereo RCA cable |
| |
 |
|
A Stereo RCA to 3.5mm Stereo adapter |
 |
|
USB plug |
|
